 |
 |
Folding Instructions |
|
  |
|
Click here to download the template patterned sheet for F-15 Paper Airplane Type A . For type B template download, Click Here. |
|
|
|
|
Folding Instructions |
|
|
|
Click here to download the template patterned sheet for F-15 Paper Airplane Type A . For type B template download, Click Here. |
|
 |
 |
| Step 1 Start with an 8 1/2"x11" paper. (Patterned-side face down) Fold the top corners inward to the center line. Fold the top corners to the bottom edge. |
Step 2
|
 |
 |
| Step 3 Bring the sloping edge to the center line and crease only upper part of the folding line 3(A to B). |
Step 4 While holding point C in place, sweep a finger under D and pull flap outward. Flatten. Repeat steps3 and 4 on right side. Make sure both wings have the same sweep angle. |
|
|
|
| Step 5 Lift edge A and bring out the triangle corner of the middle layer. This part will become the canopy of the fighter jet. |
Step 6 Flip the triangle section to the left side. |
 |
 |
Step 7 If you like to fold Type B model, jump to step 11 |
Step 8 Fold the paper in half. |
 |
|
| Step 9 Fold down the wings and fold up the wing tips. Adjust creases so that the plane has this profile. |
Step 10 The type A model should look like this. Bend up the trailing edge of the wings for better lift. |
 |
 |
Step 11 Mountain-fold the top layers as shown and tuck under. Turn the model over.
|
Step 12 Cut along the white line and fold up the bottom part along line 6. Mountain fold along center line C. Fold down wings along line A and B. |
 |
Step 13 The type B model should look like this. Bend up the trailing edge of the wings for better lift. |
