Delta Fighter

Folding Instructions

Patterned Sheet can be downloaded:  Type A(blue)  or  Type B(green)

Step 1

Step 2
Step 1.
Begin with steps 1 to 4 from the instructions of the Basic Dart. Then unfold as shown.

Step 2
Fold the left corner so that it meets a point along the right edge.


Step 3

Step 4
Step 3.
Fold back the right flap to the left using the existing center crease.

Step 4.
Fold back the left flap to the right using the existing crease. 


Step 5

Step 6
Step 5.
Repeat steps 2 to 4 for the left side.

Step 6
Fold the model in half, hiding the folds.

Step 7


Step 8
Step 7
Fold down the top wing as shown.  Ensure that the crease line starting and ending points are as indicated in the drawing.

Step 8 
Fold the two cockpit sections down together.  Top corner should meet the bottom edge.

 (Tips: Curl up the trailing edge of the wings for lift if the Delta Fighter tends to nose-dive. A short piece of tape may be placed across the top of the wings to hold them together near the cockpit.)
Step 9
Step 9
Fold down the other wing for your completed Delta Fighter.